Before You Begin Installation; Recording Serial Numbers - AMD FirePro V3900 User Manual

2 Getting Started
4. Install your new AMD FirePro graphics card.
5. Reassemble and connect your computer system.
6. Install the AMD FirePro drivers and configuration software from the AMD
Installation disc.

1.3 Before You Begin Installation

Once you have determined that your system meets the minimum requirements,
please perform the following tasks before installing your AMD FirePro V3900
workstation graphics card.

1.3.1 Recording Serial Numbers

The serial number and 102 part number on the graphics card are required for product
registration. They are located on a sticker on the back of the graphics card and are
shown in boldface and underlined in the illustration below.
Record these numbers in the space provided below and retain for future use.
1. Remove the graphics card from packing.
2. Locate the white label on the back of the graphics card.
3. Record the serial number and 102 part number.
Figure 1–1 Typical Serial Number and 102 Part Number Arrangement
1 Serial number (S/N)
2 102 part number (P/N)
AMD FirePro V3900 © 2011 Advanced Micro Devices Inc.