Rinnai Demand Duo R-Series Installation And Operation Manual page 42

To eliminate the beeps when keys are pressed
follow the steps below.
1. Press and hold both the
(Down) buttons at the same time until a beep
is heard (approximately 5 seconds). Then,
release both buttons.
To turn on the beeps, repeat the above steps.
Figure 36
❶
42
1. To lock the controller, press and hold down
2. While holding down the "Priority" button,
(Up) and
3.
To unlock the controller, follow the above steps.
Demand Duo™ R-Series (REC) Installation and Operation Manual
the "Priority" button.
press the (Up) button until a beep is heard
(approximately 5 seconds). Then, release
both buttons at the same time.
Figure 37
❷
appears in the display indicating the
controller is locked.
NOTE
The display flashes between
the set temperature to indicate the controller
is locked.
❶
and