sprayEr controls
For a video showing Control Spray 250 spraying tips and best practices, visit:
i
www.wagnerspraytech.com/controlspray250
MatErIal Flow control
The material flow control will be factory-set
i
at its lowest setting out of the box. Adjust as
needed.
•
Turn the knob out (counterclockwise) for less flow.
Generally, low material flow is needed for spraying smaller
surface areas, such as corners, lattice, or spindles.
•
Turn the knob in (clockwise) for increased flow. Generally,
high material flow is needed for spraying large surface
areas, such as fences and decks.
aIr cap / pattErn aDjUstMEnt
Adjust the spray pattern by turning the air cap
i
ears.
The air cap position will determine the
movement direction of the spray gun.
1.
Round pattern:
Use up and down, or side to side spraying motion,
depending upon the object being sprayed.
2.
Vertical pattern:
Use side-to-side motion during spraying.
3.
Horizontal pattern:
Use up and down motion during spraying.
8
2
aIr cap Ears
1
=
=
=
3
=
=
=
En
=
=
=
=
=
=
=
=
=
=
=
=