Table of Contents
Advertisement
Getting to know your appliance
en
Display
The display is structured so that the information can be
read at a glance in any situation.
The value that you can currently set is highlighted in
white text in the display. The value in the background is
displayed in grey text.
Highlighted infor-
The highlighted value can be changed immedi-
mation
ately without first being selected.
After starting an operation, either the temperature
or level remains highlighted. The white line also
serves as the heating line and gradually turns red.
Note:
When using the Microwave operating
mode, the cooking time is highlighted. The heating
line does not appear.
Enlargement
As long as you use the rotary selector to change
the highlighted value, only this value will be dis-
played larger.
Display ring
The display ring can be found around the outside of the
display.
If you change a value, the display ring shows you where
you are in the selection list. Depending on the settings
area and length of the selection list, the display ring
may be continuous or divided into segments.
During operation, the display ring turns red at second-
long intervals. After every full minute, the segments turn
red again from the beginning. As the cooking time
counts down, one segment disappears every second.
Temperature display
After the operation has started, the current cooking
compartment temperature is displayed graphically on
the display.
Heating line
The white line under the temperature turns red from
left to right as the cooking compartment heats up.
When you are preheating the appliance, the optimal
time to place the food in the cooking compartment
is when the line has completely turned red.
For set levels, e.g. the grill setting, the heating line
turns red immediately.
Residual heat
When the appliance is switched off, the display ring
indicator
shows the residual heat in the cooking compart-
ment. As the residual heat cools down, the display
ring becomes darker and disappears completely at
some point.
10
Due to thermal inertia, the temperature displayed
Note:
may be slightly different to the actual temperature inside
the oven.
Touch-screen displays
The touch-screen displays are both a display medium
and control element at the same time. They show the
options that you can select for a function and the
current setting. To select a function, simply touch the
text field directly.
The function currently selected is identified by a red
vertical bar next to it. Its corresponding value is
highlighted in white on the display.
The small red arrow next to the text field shows the
functions to which you can scroll forwards or
backwards.
Operating modes
Your appliance has various operating modes which
make your appliance easier to use.
You can find more precise descriptions of these in the
corresponding sections.
Operating mode
Heating types
~ "Operating the appliance"
on page 15
Assist
~ "Dishes" on page 36
Microwave
~ "Microwave" on page 19
MicroCombi
~ "Microwave" on page 19
Cleaning
~ "Cleaning function"
on page 28
Home Connect Assistant
~ "Home Connect"
on page 23
Basic settings
~ "Basic settings"
on page 21
--------
Use
There are various finely tuned heating
types for the optimal preparation of
your food.
For many dishes, there are prepro-
grammed setting values.
You can use the microwave to cook,
heat up or defrost your dishes more
quickly.
You can use the microwave combina-
tion function to switch on the micro-
wave and a type of heating.
There are several cleaning functions
available: Pyrolytic self cleaning and
Drying.
This function allows you to connect
your oven with a mobile device.
You can change your appliance's
basic settings to suit your needs.
Advertisement
Table of Contents
