Table of Contents
Advertisement
Start the app on the mobile device and follow the
6.
instructions for manual network registration.
The process for registering is completed once
"Successfully connected to the app" is shown in the
display.
Remote Start
If you want to start an oven operation using your mobile
device, you must activate remote start.
Notes
The "Remote start" text field is only visible if the
■
Home Connect Assistant has been successfully
completed.
Note that some operating modes can only be started
■
on the oven itself.
Touch the Menu field.
1.
Touch the "Remote Start" text field.
2.
C appears in the display
Remote start is automatically deactivated in the
following situations:
The oven door is opened 15 minutes after remote
■
start is activated.
The oven door is opened 15 minutes after the oven
■
operation ends.
24 hours after remote start is activated.
■
When you start the oven operation on the appliance,
remote start is automatically activated. You can
therefore make changes on your mobile device or start
a new programme.
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
In the Home Connect settings, press the ° field to
Note:
display network and device information.
WiFi
If WiFi is activated, you can use the Home Connect
functions.
In the networked standby mode, your appliance
Note:
requires a maximum of 3 W.
Touch the Menu field.
1.
Touch the "Basic settings" text field.
2.
Touch the "Home Connect" text field.
3.
Touch the "WiFi" text field to switch the wireless
4.
module on or off.
Disconnect from the network
You can disconnect your oven from the network at any
time.
If your oven is disconnected from the network, it
Note:
is not possible to operate the oven using Home
Connect.
Touch the Menu field.
1.
Touch the "Basic settings" text field.
2.
Touch the "Home Connect" text field.
3.
Touch the "Disconnect from network" text field.
4.
Connect to the network
Touch the Menu field.
1.
Touch the "Basic settings" text field.
2.
Touch the "Home Connect" text field.
3.
Touch the "Connect to network" text field.
4.
Touch the
5.
"Connect manually" or
"Connect automatically" text field.
Follow the notes in the section
6.
"Manual registration in the home network" or
"Automatic registration in the home network".
Home Connect
en
25
Advertisement
Table of Contents
