Transmitter Layout - Horizon Hobby Axial AXI00002 Instruction Manual

Jeep wrangler jl 1/24 scale electric 4wd ready-to-run
Table of Contents

Advertisement

EN

TRANSMITTER LAYOUT

Use the diagram below to familiarize yourself with the different parts of your transmitter.
The transmitter antenna is mounted internally and is located in the front portion of the transmitter. When you are driving
your model, hold the transmitter so it is oriented as close to vertical as possible. Do not try to follow your model with
the transmitter. This provides the best RF signal between the transmitter and the receiver. Do not cover the front of the
transmitter during use as doing so can block the RF signal, resulting in loss of control.
Throttle Trim Knob
Adjusts the throttle control rate
Battery Level Indicator
Solid Red: Battery voltage is good.
Flashing Red: Battery voltage is
critically low (below 4V). Replace
the transmitter batteries.
Battery Cover
Power Switch
Forward
6
Normal < > Reverse
Changes the direction of steering
Steering Dual Rate
Adjusts the total
steering travel
Steering Trim
Adjust to make the
vehicle drive straight
with no input of the
steering wheel
Bind Button
Steering Wheel
Turn right or left to
steer the vehicle
Throttle Trigger
Pull to drive forward
Push to drive in reverse
Reverse
Stop

Advertisement

Table of Contents
loading

This manual is also suitable for:

Axial axi00002t1Axial axi00002t2

Table of Contents