Bosch B8512G Operation Manual page 179

Control Panels
Configuring a RADION keyfob or an Inovonics Transmitter for the user:
1. Use NEXT to go to the Configure Keyfob option, and press ENTER,
or simply press [4].
2. Press ENTER to continue.
3. To manually enter the RFID, if desired, press [1] or ENTER to open
the RFID option. Otherwise, the keypad automatically learns the
RFID into the security system when you add a RADION keyfob or an
Inovonics Transmitter.
4. Press ENTER to continue.
5. Enter the RFID.
6. Press ENTER to save the RFID and return to the previous menu.
7. Use NEXT to go to the Add a Keyfob option, and press ENTER or
simply press [2].
8. Press ENTER to continue.
9. On a RADION keyfob, press any button on the keyfob. On an
Inovonics Transmitter, open the transmitter and press the RESET
button, per the manufacturer's instructions. The keypad shows
Keyfob enrolled and returns to the previous menu.
10. If you need to replace the keyfob or transmitter you just added (for
example, you accidentally added the wrong one), use NEXT to go to
the Replace a Keyfob option, and press ENTER,or simply press [3],
and then follow the previous step.
11. To remove the added keyfob or transmitter, use NEXT to go to the
Remove a Keyfob option, and press ENTER or simply press [4].
12. Press ESC to exit the menu.
Adding or replacing a card for the user:
1. Use NEXT to go to the Configure Card option, and press ENTER, or
simply press [5].
2. Press ENTER to continue. The keypad shows Present card.
Bosch Security Systems B.V.
B92x/B91x Users menu | en
2019.06 | 07 | F.01U.307.371
179