Bosch B8512G Operation Manual page 146

146
en | B92x/B91x On/Off menu
24.5.2 Unbypass
Unbypassing a point returns a bypassed point to the security system so
that it can once again respond to trouble and alarm conditions.
Unbypassing a point:
1. Open the Main Menu.
2. Press [1] or ENTER to open the On/Off menu.
3. Use NEXT to go to the Bypass menu, and press ENTER, or simply
press [5].
4. Use NEXT to go to the Unbypass menu, and press ENTER, or simply
press [2].
5. Enter your passcode and press ENTER.
6. Select a point to bypass.
7. Press ESC to exit the menu.
2019.06 | 07 | F.01U.307.371
Control Panels
Bosch Security Systems B.V.