Related Manuals for Alfa IN PEGAS 161 T PULSE HF
Summary of Contents for Alfa IN PEGAS 161 T PULSE HF
- Page 1 WELDING INVERTER PEGAS 161 T PULSE HF PEGAS 201 T PULSE HF OPERATING MANUAL ALFA IN a.s. © www.alfain.eu PEGAS 161-201 T PULSE HF manual EN 03...
-
Page 2: Table Of Contents
OPERATOR CONTROLS ................10 GETTING STARTED ................. 14 TWO STROKE AND FOUR STROKE IN TIG MODE ....... 16 ROUTINE MAINTENANCE & INSPECTION ..........17 STATEMENT OF WARRANTY ..............18 DISPOSAL ....................19 WARRANTY LIST ..................19 ALFA IN a.s. © www.alfain.eu... -
Page 3: Introduction
3/19 INTRODUCTION Congratulations on your new ALFA IN product. We are proud to have you as our customer and will strive to provide you with the best service and reliability in the industry. This Operating Manual has been designed to instruct you on the correct use and operation of your ALFA IN product. -
Page 4: Safety Instructions And Warnings
The operator must be aware of all the special regulations which he needs to conform to when welding in enclosed spaces with a high risk of explosion. To prevent electric shock, we strongly suggest the following rules: ALFA IN a.s. © www.alfain.eu... - Page 5 Only personnel authorised by this company can carry out maintenance on the machine. NOTE: Device complies with IEC 61000-3-12. Working ambient temperature between -10 and +40 °C. Relative humidity below 90% at +20 °C. Up to 3000 m altitude. ALFA IN a.s. © www.alfain.eu...
-
Page 6: Technical Data
During operation, the device may be the source of interference. We warn users Caution , that they are responsible for possible interference from welding. TECHNICAL DATA PEGAS 161 T PULSE HF Method Mains voltage V/Hz 1x230/50-60 Welding current range 5 - 160... -
Page 7: Equipment
25 A. The corresponding data for such a 32 A plug are stated in the table above in brackets. Replacement of the plug may only be performed by ALFA IN as authorized service personnel. ALFA IN continuously strives to produce the best product possible and therefore reserves the right to change, improve or revise the specifications or design of this or any product without prior notice. - Page 8 35-50 200A Pressure Reducer 6008 FIXICONTROL Ar 2 manometers GCE Box for PEGAS BLACK 5.0178 50x58,5x18 cm 7.511.249 Belt PEGAS Welding Helmet S9B S7SUN9B Shooting Blue Shark Welding Helmet S9B S7SUN9BBlack Shooting Blue Shark Black ALFA IN a.s. © www.alfain.eu...
- Page 9 9/19 3178 Gas Cylinder Argon 5 l 3176 Hose AR 1m with manom. 6053 MAGNET ON/OFF 40 kg 6052 MAGNET ON/OFF 75 kg ALFA IN a.s. © www.alfain.eu...
-
Page 10: Operator Controls
10/19 OPERATOR CONTROLS MAIN PARTS Pos. Description Operating panel LED ON Gas outlet connector Quick connector (-) Torch control connector Quick connector (+) ON/OFF switch Mains socket with a plug Gas inlet connector ALFA IN a.s. © www.alfain.eu... - Page 11 3. TIG LA start 4T 4. TIG LA start 2T 5. TIG HF start 4T 6. TIG HF start 2T TIG LA 4T – Lift Arc ignition TIG, four stroke - position of the method switch 17 ALFA IN a.s. © www.alfain.eu...
- Page 12 3 s the function deactivates and the machine switches automatically into the Main Mode. 4. After selection of a LED of a parameter to be set, appropriate LED will start ALFA IN a.s. © www.alfain.eu...
- Page 13 On the display will appear “ON”. The function will be automatically saved and LED 25 – main welding current will become active. 4. One can set off the pulse similarly. Just select “OFF“. ALFA IN a.s. © www.alfain.eu...
-
Page 14: Getting Started
[mm] current [A] length [mm] without slag time [s] per 1 second [g/s] 30 - 55 0,11 70 - 110 0,22 90 - 140 0,32 120 - 190 0,44 ALFA IN a.s. © www.alfain.eu... - Page 15 4T LA – four stroke, contact ignition – Lift Arc 2T LA – two stroke, contact ignition – Lift Arc 4T HF – four stroke, HF ignition (High Frequency) 2T HF – two stroke, HF ignition (High Frequency) ALFA IN a.s. © www.alfain.eu...
-
Page 16: Two Stroke And Four Stroke In Tig Mode
Steel / stainless steel 3 – 4 3 – 5 4 – 6 5 – 7 5 – 9 TWO STROKE AND FOUR STROKE IN TIG MODE TWO STROKE – 2T Welding current Down slope Current Postgas Pregas ALFA IN a.s. © www.alfain.eu... -
Page 17: Routine Maintenance & Inspection
6. Troubleshooting and repairing of PEGAS welding equipment should only be carried out only by suitably qualified or competent person. 7. A ‘competent person’ must be a person who has acquired through training, qualification or experience, or a combination of them, the knowledge and ALFA IN a.s. © www.alfain.eu... -
Page 18: Statement Of Warranty
3. ALFA IN will repair or replace, at its discretion, any warranted parts or components that fail due to defects in material or workmanship within the warranty period. -
Page 19: Disposal
As a warranty list serves proof of purchase (invoice) on which is the serial number of the machine, eventually a warranty list below, which is filled in by an authorized dealer. Serial number: Day, month (written in words) and year of sale: Stamp and dealer signature: ALFA IN a.s. © www.alfain.eu...
Need help?
Do you have a question about the PEGAS 161 T PULSE HF and is the answer not in the manual?
Questions and answers