Related Manuals for Alfa IN PEGAS 200 T PULSE HF
Summary of Contents for Alfa IN PEGAS 200 T PULSE HF
- Page 1 - 1 - WELDING INVERTER PEGAS 160 T PULSE HF PEGAS 200 T PULSE HF OPERATING MANUAL ALFA IN a.s. © www.alfain.eu PEGAS 160-200 T PULSE manual EN 06...
-
Page 2: Table Of Contents
EQUIPMENT ..................... 7 OPERATOR CONTROLS ................8 GETTING STARTED ................12 TIME PHASES OF WELDING IN TIG REGIME ........13 ROUTINE MAINTENANCE & INSPECTION ..........14 STATEMENT OF WARRANTY ..............15 10. DISPOSAL ..................... 15 ALFA IN a.s. © www.alfain.eu... -
Page 3: Introduction
1. INTRODUCTION Congratulations on your new ALFA IN product. We are proud to have you as our customer and will strive to provide you with the best service and reliability in the industry. This Operating Manual has been designed to instruct you on the correct use and operation of your ALFA IN product. -
Page 4: Safety Instructions And Warnings
The operator must be aware of all the special regulations which he needs to conform to when welding in enclosed spaces with a high risk of explosion. To prevent electric shock, we strongly suggest the following rules: ALFA IN a.s. © www.alfain.eu... - Page 5 Before opening the machine switch off the machine and disconnect it from the power socket. Only personnel authorised by this company can carry out maintenance on the machine. NOTE: Device complies with IEC 61000-3-12. ALFA IN a.s. © www.alfain.eu...
-
Page 6: Technical Data
61,0 61,0 Welding current (DC=100%) I Welding current (DC=60%) I Welding current (DC=x%) I 25%=160 25%=160 Insulation class Protection IP23S Standards EN 60974-1, EN 60974-10 cl. A Dimensions (w x l x h) 140x370x230 Weight ALFA IN a.s. © www.alfain.eu... -
Page 7: Equipment
140x370x230 Weight ALFA IN continuously strives to produce the best product possible and therefore reserves the right to change, improve or revise the specifications or design of this or any product without prior notice. Such updates or changes do not entitle the buyer of equipment previously sold or shipped to the corresponding changes, updates, improvements or replacement of such items. -
Page 8: Operator Controls
400P232175 Electrode T 2%Th 3.2x175 5. OPERATOR CONTROLS MAIN PARTS Fig . 1 Main parts Pos. Description Operating panel LED ON Gas outlet connector Panel quick connector - Torch control connector Panel quick connector + ALFA IN a.s. © www.alfain.eu... - Page 9 Adjusting the gas flow - position of the method switch 17 Method switch 1. MMA coated electrode 2. TIG Adjusting the gas flow - it is not possible to weld in this position 3. TIG LA start 4T 4. TIG LA start 2T ALFA IN a.s. © www.alfain.eu...
- Page 10 1. The machine will be the Main Mode after switching ON - LED 25 will illuminate and turning the encoder 21 will change main welding current 2. Turning the encoder 21 changes parameters. 3. Pressing the encoder 21 activates function of selecting a new parameter to ALFA IN a.s. © www.alfain.eu...
- Page 11 On the display will appear “ON”. The function will be automatically saved and LED 25 – main welding current will become active. 4. One can set off the pulse similarly. Just select “OFF“ ALFA IN a.s. © www.alfain.eu...
-
Page 12: Getting Started
4T LA – four stroke, contact ignition – Lift Arc 2T LA – two stroke, contact ignition – Lift Arc 4T HF – four stroke, HF ignition (High Frequency) 2T HF – two stroke, HF ignition (High Frequency) ALFA IN a.s. © www.alfain.eu... -
Page 13: Time Phases Of Welding In Tig Regime
The value of the second current is automatically set to 50% of the pre-set value of the main welding current. To enter the second welding current press the torch button for a short time and release it. To get back to the main welding current ALFA IN a.s. © www.alfain.eu... -
Page 14: Routine Maintenance & Inspection
8. The person carrying out the servicing needs and repairs must know what to look at, what to look for and what to do. ALFA IN a.s. © www.alfain.eu... -
Page 15: Statement Of Warranty
3. ALFA IN will repair or replace, at its discretion, any warranted parts or components that fail due to defects in material or workmanship within the warranty period.
Need help?
Do you have a question about the PEGAS 200 T PULSE HF and is the answer not in the manual?
Questions and answers