Battery And Charging - Hohem iSteady V2S User Manual

Battery and Charging

Please fully charge the iSteady V2S before using it
for the first time.
Charging Method:
To charge the iSteady V2S, connect a USB adapter (not included,
choose 5V-2A for better results) into the charging port with the
provided USB-C charging cable.
Mount & Balance Mobile Phone on the Gimbal?
① Expand the ② Tighten the
gimbal. knob by turning it
clockwise.
The gimbal would not function
properly if the knob was not
tightened.
Ensure your phone is centrally clamped to the rubber pads, otherwise the
gimbal would vibrate or turn off automatically.
Booting up iSteady V2S
USB adapter Type A-Type C
（5V-2A） charging cable
*NOT included
in the package
③ Make sure that the
phone camera is on the
left side of the clamp.
Insert your mobile
device by putting it stuck
in the bottom of phone
clamp and pulling the
top side of the clamp to
clip it into place.
Long press M button for 3
seconds to power on
02
④ Slide the
phone and
keep it clamped
and balanced
centrally before
powering on.