Table of Contents
Advertisement
Button Function
①
M Button(Power Button)
Press and hold for 3s:
Switch between working
Press once:
modes (PTF-PF-L-POV)
Standby mode (Press M
Press twice:
button to exit)
Auto calibration
Press five times:
*Before pressing Zoom Slider and Shutter Button, please make sure that the
Bluetooth is connected.
Follow steps below:
1.Turn on the Bluetooth of your mobile device.
2.Search for devices and tap on the device name starting with "V2S".
3.It is connected when the Bluetooth indicator shows green.
③
Zoom Slider
(Make sure that Bluetooth is already
connected.Only Available in the Hohem
Joy and Android 10.0 or later.)
Zoom in
Push up:
Zoom out
Push down:
④
Shutter Button (Please ensure the
Bluetooth pairing)
Take photo, Start/End video
Press once:
PHOTO/VIDEO switch
Press twice:
Front/Rear camera
Press three times:
switch (Make sure that Bluetooth is
already connected.Only Available in
the Hohem Joy and Android 10.0 or
later.)
①
Power on/off
③
④
⑤
②
Joystick
Tilt rotation control
Up/Down：
Pan rotation control
Left/Right：
(It is able to control the roll rotation
through "Left/Right Joystick" Setting
in Hohem Joy App)
⑤
Function Button
Landscape mode/Portrait
Press once:
mode
Recenter the gimbal
Press twice:
Press three times:
180° spin shot (auto rotation)
Press seven times:
pairing
When paired with a remote control*
Press function button once:
pairing
Press function button twice:
paired remote control* (The paired
remote control will be unavailable and
needs to be re-paired.)
Press on function button:
gimbal battery level
(Remote control is sold separately.)
04
②
180° inception mode/
Remote control*
Cancel
Clear the
Check the
Advertisement
Table of Contents
Need help?
Do you have a question about the iSteady V2S and is the answer not in the manual?
Questions and answers