babymoov Simply Care Instructions For Use Manual page 7

EN.
Thank you for choosing our Baby monitor Simply Care. We recommend you read these
instructions carefully in order to use your Baby monitor to best advantage and ensure
it continues to operate as long as possible . If you should find a fault, however, or if you
have any problem, please contact our company.
IMPORTANT. You have bought a product with an analog technology, if your product
makes a puff as background noise it is perfectly normal: it is caused by perturbations
connected to the environment in which your product is used. This baby monitor uses
low emission power, in order to protect baby's health. You are advised to use the "Vox"
mode of your baby monitor a maximum: with this function, the receiver and transmitter
do not communicate continuously in order so as to the amount of radiation emitted in
the bedroom. When baby cries, the system is activated immediately to alert parents;
when the baby doesn't cry, the transmitter and the receiver communicate only each
20 seconds to check the good communication.
• Range 300 m in an open space.
• 2 channels to prevent interference and ensure optimum
sound quality.
• Voice activated transmitter (advised) or continuous
transmission.
• Visual alarm on receiver to be warned even when the
volume is off.
• The Baby monitor Simply Care should not be seen as a medical device.
• In Addition to using Baby monitor Simply Care, it is strongly recommended that an adult checks on your baby
directly, on a regular basis. Premature babies or children considered to be at risk should be monitored by your
pediatrician or a health professional.
• Never go away from your baby outside the house, even a short moment.
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable;
• Use only power supplies listed in the user instructions.
• External power supply unit (Manufacturer: Shenzhen Wanyou Electronic CO., LTD. ;
Model name: M4-050100A1) ; Rating, Input: 100-240 V ~ 50/60 Hz, 0.3 A ; Output: 5V DC 1A.
• For optimum use of your babyphone, you are advised to use good quality AAA alkaline batteries.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the device before being charged.
• Different types of batteries: new and used batteries, or rechargeable and not rechargeable batteries, are not to
be mixed.
• Rechargeable batteries are only to be charged under adult supervision.
• Batteries have to be inserted with the correct polarity (+/-).
• Exhausted batteries are to be removed from the device.
• The supply terminals are not to be short-circuited.
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
FUNCTIONS
• Volume control on the receiver.
• Low battery alarm on both the transmitter and the
• Transmitter and receiver run on batteries.
WARNINGS
SIMPLY CARE • Instruction manual
receiver.
7