Controls Layout; Power Supply - babymoov Simply Care Instructions For Use Manual

• When not using the monitor for as long period of time,
remove all batteries from the transmitter and receiver
to avoid damage due to battery leakage.
• The baby monitor is best performed within a
temperature range of 0 °C to + 45 °C.
• Do not leave the monitor expose to strong sunlight for
a long time or nearby any heat source, moisture and
excessive dusty environment.
• Do not open the cabinet, no service able part inside.
a. Transmitter unit
b. Receiver unit
c. User manual
d. 5 V AC adapter x 2
Transmitter
1 . Power on / Battery low indicator
2. Power On-Off and VOX/continuous switch
3. Channel switch
4. Transmit indicator
5. Micro jack
6. Microphone
1. Operation using batteries (not supplied)
Slide open the battery cover of transmitter and
receiver. Insert four pieces AAA size (UM-3) alkaline
batteries into the compartment. Observe correct
polarities indication (+/-).
8
PRECAUTIONS
ACCESSORIES
a. b.

CONTROLS LAYOUT

POWER SUPPLY

SIMPLY CARE • Instruction manual
• Waste Electrical and Electronic Equipment should
be disposed of by selective collection. Do not throw
electrical and electronic equipment away with unsorted
household waste, but dispose of it at a selective
collection point.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU.
c.
Receiver
7. Power on / Battery low indicator
8. Speaker
9. Power On/Off and volume control
10. Channel switch
11 . Visual LED alarm
12. Micro jack
2. Operation using AC adapter
The unit can be operated on AC mains using the
supplied 5 V AC adapter. Connect the adapter's
plug to the jack connector of the transmitter (5)
or the receiver (12). Connect the adapter to the
mains. The power supply from the battery will be
cut off once the adapter's output plug is inserted
into jack port.
N.B.: The communication range is longer when the
transmitter is operated on AC mains.
d.