- FULL MIRROR-RED ADJUSTMENT
1. Supply 100% Yellow Signal and project on the screen.
2. Loosen 2 Screws (C) of the Full Mirror Red.
3. Insert a (-) screwdriver into Portion (c) and move the Full Mirror
Red in the direction shown by the arrows so that color uniformity
is achieved over the whole screen. And then tighten 2 screws (C).
- FULL MIRROR-BLUE ADJUSTMENT
1. Supply 100% White Signal and project on the screen.
2. Loosen 2 Screws (D) of the Full Mirror Blue.
PDF created with pdfFactory Pro trial version
Fig. 5-4-18
59
www.pdffactory.com