Table of Contents
Advertisement
Before using the Remote Control
Operating range of the remote control unit
Point the remote control unit toward the remote control signal receptor on the front or the rear of the Projector to operate
the Projector. Refer to the illustration below for the operating range of the remote control unit.
<Top view>
Remote control unit
(approximately 7m)
(When operating from in front)
<Side view>
Remote control unit
(approximately 7m)
(When operating from in front)
Note
• The operating distance is within 7 m (approximately 23.0 ft) from directly in front of the front or rear remote control
signal receptors.
• If strong light is allowed to shine onto the remote control signal receptor, or if there are any obstacles between the
remote control signal receptor and the remote control unit, correct remote control operation may not be possible.
If facing the remote control unit toward the screen
The Projector can also be operated by pointing the remote control unit toward the screen as shown in the illustration
below.
Screen
Note
If facing the remote control unit toward the screen to operate the projector, the operating range of the remote control unit
will be limited by the amount of light reflection loss caused by the characteristics of the screen used.
Remote control unit
Projector
Projector
Remote control unit
(approximately 7m)
(When operating from behind)
Remote control unit
(approximately 7m)
(When operating from behind)
Projector
11
Advertisement
Table of Contents
