Table of Contents
Advertisement
tighten a Hexagon Screw (B) with a Hexagon Wrench.
- POLARIZER BLUE ADJUSTMENT
1. Insert a black paper in the gap between the LCD Unit and the
Polarizer Unit and shut out the light completely for the R and G
light paths.
2. Supply Black Signal (0%) and project on the screen.
3. Loosen a Hexagon Screw (C) of Polarizer Blue Unit.
4. Move the Polarizer Blue Unit to the right and left so that the
whole screen becomes the blackest possible value, and then
tighten a Hexagon Screw (C) with a Hexagon Wrench.
Note:
Use a Hexagon Wrench (2.5mm) for Hexagon screw (A), screw (B) and screw (C).
PDF created with pdfFactory Pro trial version
Fig. 5-4-15
Fig. 5-4-16
57
www.pdffactory.com
Advertisement
Table of Contents
