Table of Contents
Advertisement
3. After completing adjustments 5.4.11. through 5.4.4., 5.4.11. and
5.4.12., press the" MENU" button to release from"Lcd/Fan Adjust"
mode. (Adjustment data is memorized in EEPROM IC
(IC6009,IC6010) by pressing" MENU" button.) Otherwise,
adjustment data 5.4.1. through 5.4.4., 5.4.11. and 5.4.12. will be
cancelled.
Preparation for Adjustments 5.4.13. through 5.4.16.
1. Connect a jumper wire between TP6014 and TP6015 on Main
C.B.A. for over 5 seconds to set to the Factory Adjust Mode.
2. Press
Adjust" mode, and press
mode.
3. After completing adjustments 5.4.13. through 5.4.16, press the"
PDF created with pdfFactory Pro trial version
or
button on remote control to select"Video/Rgb
www.pdffactory.com
or
button to set to"Video/Rgb Adjust"
Fig. 5-4-3
Fig. 5-4-4
44
Advertisement
Table of Contents
