Insert Or Remove Sim Card - Motorola edge 40 User Manual

Set up phone
About water, splash, and dust resistance
Tested under controlled laboratory conditions, the phone is water, splash and dust resistant to a rating of
IP68 (IEC 60529) and can be submerged up to 1.5 meters in still, fresh water for up to 30 minutes. Your
phone is not completely waterproof, nor is it designed to work underwater. Water, splash, and dust
resistance are not permanent, and the protection performance may continue to decline due to daily use.
To prevent water damage to your phone:
• Avoid prolonged exposure to water, and do not intentionally submerge in water.
•
Dry your phone and ports thoroughly with a soft, clean cloth.
•
Don't try to charge your phone when it's wet.
•
Don't expose your phone to salt water or other liquids other than fresh water.
•
Don't expose your phone to water at high pressure.
• Don't drop, puncture, or scratch your phone, as this could damage the water repellent features.

Insert or remove SIM card

Your phone might support using an eSIM (embedded SIM card), in addition to the physical SIM card.
Contact your carrier for details.
Set up eSIM
If your carrier provided you with an eSIM:
1. If you don't have a network connection,
2. Go to Settings > Network & internet > SIM cards.
3.
Next to eSIM, touch
4. Touch Download a SIM instead?
5. Follow onscreen instructions to set up your eSIM.
Insert or remove physical card
1. Insert the tool into the hole in the tray and gently push to pop it out.
connect to
> Take me there.
Wi-Fi.
3