Bornay WIND+ Manual page 55

Web server
As of Firmware version 4.18, the equipment incorporates an internal monitoring
system.
To Access the mill's real-time data through the web server, an IP scanner program
Will be necessary. With this program, the regulator's IP name: Bornay Will be
obtained.
Note: This monitoring Works locally, in order to Access or scan it is necessary to be
always connected to the same internet network, either by Wi-Fi or by Ethernet.
Once the IP has been obtained, monitoring can be accessed by placing the IP directly
on the top bar of search engine. This can be viewed locally with any device that
supports a web interface(mobile pone, computer, Tablet, etc.)
The interface has the following widgets:
- Upper central drop-down where the serial number and model of the
wind turbine is shown
- Drop-down upper right to choose the language.
- Tabbed menu (Monitoring and Graph)
55