Bornay WIND+ Manual page 54

Communications and monitoring
The regulator provides several options for communication with the outside.
At the present time, the following option are placed:
- RS485 communications ports.
Ethernet connector
-
Wi-Fi antenna / Antenna for communication via wifi
-
How to connect to the wifi network
To be able to connect the equipment via wifi network: you have to generate a wifi
network from a mobile phone. The network must have the following properties:
SSID name: bornay
Password: bornay1234
Authentication type: WPA2
By doing this, the equipment will connect to that network (the blue led will start
flashing) and from Bornay we will have access to the equipment. In this way, Bornay
personnel will be able to connect the equipment to the wifi network provided by the
client. And thus leave the equipment connected to the local wifi network.
If you have any doubts or problems in doing this, you can contact with Bornay.
54