Maintenance And Service; Environment Protection - Bosch GLL 50 Operating/Safety Instructions Manual

Keep the tool clean at all times.
Do not immerse the tool into water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Regularly clean the surfaces of the laser beam outlets in
particular, and pay attention to any fluff of fibers.
If the tool should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by an authorized
after-sales service center for Bosch power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of the
tool.

ENVIRONMENT PROTECTION

Recycle raw materials & batteries instead of disposing of
waste. The unit, accessories, packaging & used batteries
should be sorted for environmentally friendly recycling in
accordance with the latest regulations.

Maintenance and Service

Store and transport the tool only in the
supplied protective case.
-31-