Quick Reference Table - Supermicro H12SSW-iN User Manual

H12SSW-iN/NT Motherboard User's Manual

Quick Reference Table

Jumper Description
UID SW Unit ID switch (push-button toggle switch ON/OFF)
JBT1 Clear CMOS
JWD1 Watch Dog Timer control
JPL1 LAN Enable/Disable (H12SSW-NT only)
JPG1 Onboard Video Disable/Enable
LED Description
LED1 UID LED
LED6 Power LED
LED 7 BMC Heartbeat
LED12 M.2-C2 Interface Detection
LED11 M.2-C1 Interface Detection
Connector
Battery (BT1)
COM 1, COM 2
JCPLD1
FAN 1~6
JF1
JSD1, JSD2
JTPM1
SATA0, SATA1
JL1
JOH1
USB 0/1 (3.0)
USB 2/3 (3.0)
USB 4 (3.0)
USB 5/6 (3.0)
SXB1A, SXB2, SXB1C
JPWR2
JPWR1
Note: The table above is continued on the next page.
Description
Onboard CMOS battery
Rear panel COM port #1, Header for COM port #2
Complex-Programmable Logical Device (CPLD) header
System cooling fan headers
Front control panel
SATA DOM power connector
Trusted Platform Module (TPM)/Port 80 connector
Internal SATA Ports
Chassis intrusion header
Chassis overheat header
Back panel USB 3.0 ports (USB 0/1)
Back panel USB 3.0 ports (USB 2/3)
USB 3.0 type A port (USB 4)
Internal USB 3.0 header (USB 5/6)
Riser slots
24-pin ATX power supply connector
12V 8-pin ATX CPU power connector
12
Default Setting
Off
Open (Normal)
Pins 1-2 (Reset)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Status
Blue: UID Activated
On: Power On
Blinking: BMC Normal/Working
On: SATA Off: PCIe
On: SATA Off: PCIe