Installer's Guide
Items Shipped with the 17 Series Mini-Split System
After unpacking the unit(s), please refrain from disposing of the packaging materials until items listed below
are located. If any of these are missing, please contact the point of sale to obtain these items.
Indoor Unit
1. Wireless handheld remote control
2. Refrigeration pipe insulation (short piece)
3. Mounting Plate
4. Installation instructions (may be included in outdoor unit)
5. Batteries for the remote control*
6. Flare nuts for connecting refrigerant pipes*
7. Mounting fasteners*
Outdoor Unit
1. Installation Manual
2. Warranty Letter
3. Drain pipe connector
*typically packaged in cellophane bubble
Necessary tools
1. Drill
2. Hole Saw
3. Phillips(TM) screwdriver
5. Vacuum pump capable of pulling to 350 microns
6. Manifold gauge set designed for this type of equipment
7. Manifold gauge hoses with 5/16" connections or 1/4" to 5/16" adapters.
8. Tubing benders
9. R-410A Flaring tool
10. Adjustable wrench
11. Nitrogen regulator
12. Nitrogen flow meter
13. Tube cutter
88-M4MHW17-1B-EN
7