Connection To An External Monitor - Philips LC313199 User Manual

AV AV
Source Source Menu Menu
Mute Mute
Lamp Lamp
Stand Stand
by
by
Temp
Temp
Philips Multimedia Projector
4. Installation
Connecting to an external monitor
1 Connect the VGA Y connector marked 'Projector' (4a), of an optional VGA Y-cable, to the
Computer (in) socket of your projector.
OK OK
2 Connect the VGA cable supplied (1a) between the computer and the VGA Y connector
marked 'Computer' (4b).
3 Connect the VGA Y connector marked 'Monitor' (4c) to the VGA cable (5) of the monitor.
4 Switch on your Computer.
5 Switch on the projector.
6 Select 'Computer' input, using the Source button.
– 'Computer' appears on the screen.
7 Press Menu.
– The menu bar appears on the screen.
8 Use Cursor Control to select 'Settings' in the menu bar.
9 Use Cursor Control to select 'Monitor out'.
10 Use Cursor Control to select 'On'.
– The projector will indicate the necessity to connect the Y-cable.
11 Switch on the external monitor.
– The image projected is simultaneously shown on the monitor.
14
Connecting to a computer
English User guide bSure1 / bSure 2
<