Connecting To A Computer; Pc/Macintosh - Philips LC313199 User Manual

Philips lc313199: user guide

Hide thumbs Also See for LC313199:

Brochure & specs (2 pages)

Table Of Contents

Table of Contents

Philips Multimedia Projector

4. Installation

For external monitor

connection only

Philips VGA/MAC adapter

PC/Macintosh

Connect the Data (out) socket of the computer to the Computer (in) socket of the

projector and secure the plugs by tightening the thumb screws.

For this, use the VGA/USB cable supplied (1a).

Connect the USB (upstream) socket of the projector to the USB downstream port of the

computer.

For this, use the VGA/USB cable supplied (1b).

or:

Connect the PS/2 (out) socket of the projector to the PS/2 (in) socket of the computer.

For this, use an optional PS/2 cable (2).

•

When switching on, first switch on the projector and then the PC.

–

You can now manipulate the mouse cursor on the computer and on the screen, using

Cursor Control on the remote control. When using the USB connection, make sure

Windows 98, Windows ME, Windows 2000 or Windows XP is installed on the computer.

–

The display settings of the computer will be changed to fit the capability of the projector.

–

Audio information from the computer will now be heard via the projector speaker (only

with bSure2 Brilliance version):

If required you can connect the Audio out socket of the computer to the Audio in

Computer socket of the projector.

For this use an optional audio cable (3).

–

Audio information from the Computer will then be played via the projector speaker.