Connection To An External Monitor - Philips Garbo User Manual

AV AV
Source Source Menu Menu
Mute Mute
Lamp Lamp
Stand Stand
by
by
Temp
Temp
Philips Home Cinema Projector
4. Installation
Connecting to an external monitor
1 Connect the VGA Y connector marked 'Projector' (5a), of an optional VGA Y-cable, to the
Computer (in) socket of your projector.
OK OK
2 Connect the VGA cable supplied (1) between the computer and the VGA Y connector
marked 'Computer' (5b).
3 Connect the VGA Y connector marked 'Monitor' (5c) to the VGA cable (6) of the monitor.
4 Switch on your Computer.
5 Switch on the projector.
6 Select 'Computer' input, using the Source button.
– 'Computer' appears on the screen.
7 Press Menu.
– The menu bar appears on the screen.
8 Use Cursor Control to select 'Settings' in the menu bar.
9 Use Cursor Control to select 'Monitor out'.
10 Use Cursor Control to select 'On'.
– The projector will indicate the necessity to connect the Y-cable.
11 Switch on the external monitor.
– The image projected is simultaneously shown on the monitor.
English User guide Garbo
Connecting to a computer <
16