Control Via The App Undok - Monacor WAP-204RS Instruction Manual

mode and, in addition, the alarm time setting
will be indicated next to the icon .
5) In standby mode, the button ALARM can
be used to activate /deactivate the alarms on
or off . Press the key repeatedly to select the
setting desired:
Setting
both alarms Off
only alarm 1 On
only alarm 2 On
both alarms On
If the device is in standby mode, it will be switched
on at the alarm time and the alarm bell icon will
flash on the display .
To stop the alarm, press the button ALARM:
The device will return to standby .
Note: If the alarm is not stopped, the device will au-
tomatically return to standby after 60 minutes .
The snooze function can be used to stop and
resume the alarm: After the alarm, press the
button SLEEP to switch the device to standby so
that the alarm will start again after 5 minutes .
To change the alarm interval, press the button
SLEEP repeatedly:
5, 10, 15 or 30 minutes
When the snooze function has been activated
with the button SLEEP, the display will show the
remaining time before the next alarm .
Indication on the display
no bell icon
bell icon 1
bell icon 2
bell icons 1 and 2

9 Control via the app UNDOK™

The app UNDOK™ will allow you to control the
device from a smartphone or tablet computer .
The app is available for devices using the operat-
ing system "Android" or "iOS" and is available
for free download from the corresponding app
store .
Notes:
1 . The app is provided by a third party and is not
covered by the warranty of MONACOR INTERNA-
TIONAL . In case of any problems, please contact
the provider of the app!
2 . The app may have been further developed in the
meantime; therefore, the details listed here may
no longer be up to date .
1) Download the app on your smartphone / tab-
let and open the app . When a prompt from
the app appears requesting permission to
access controllable devices in the network,
permission must be granted; otherwise, con-
trol via the app will not be possible .
2) When the app has been opened, the start
screen will show an overview of available
devices . The device will be displayed with
its "Friendly Name" = name of the device
in the network ( ☞
➜ Info ➜ Friendly Name
If the device is not on the list, check the
network settings and set up the device again
if necessary . Alternatively, you can try to use
the setup wizard of the app in order to con-
nect the device to the network . In case of any
problems, please refer to the information in
the text box at the end of this chapter .
3) Tap the name of the device to open the con-
trol page for the device . The user interface
of the page is self-explanatory and can be
operated intuitively . "SOURCE", for exam-
ple, is used to select the operating mode
and "BROWSE" to select one of the options
available for the mode selected . When you
tap the icon
or in the podcast mode, the storage locations
will be shown: The current station can be
saved (tap the plus sign behind the storage
location number) and called up again . "NOW
PLAYING" will show full information about
the current replay .
Setup options for the device (e . g . change
of name) can be called up in the taskbar at
menu "System settings"
) .
in one of the radio modes
51