Pima DPS743 Installation Instructions

Wireless 2-Way
PIR/PET Detector
Installation
Instructions
Model:
DPS743 / DPS786
DPP743 / DPP786
Step 3: Mount the Detector on the Wall Bracket
Figure 4
1) Description
The Wireless DPS/DPP PIR/PET
is a stylish wall mounted
passive infrared detector.
Features include:
•
Selectable range of up to 10m
in PIR ver. or 8m in PET ver.
•
Easy battery replacement
What's in the box:
•
Wireless DPS/DPP
PIR/PET Detector
•
Screws Kit: 1 screw ø2.5x6
mm; 2 screws ø3.5x25 mm
•
Installation Instructions
Step 1a: Preliminary Considerations
Figure 5
Walk Test
Figure 9
2) Installation
Step 1a: Preliminary
Considerations
Select the mounting location for
best coverage of the area that is to
be protected.
Install the device in a location
where the detector's field of view
is clear of any static obstacle.
Please note that walking direction
must cut across the beam pattern
(see Figure 1).
Step 1b: Coverage Patterns (see
Figures 2 and 3)
Pet Coverage Pattern
Figure 1
Step 4: Inserting Battery
Fastens the detector to
the bracket
Figure 6
Step 2: Enrolling the Detector
into the System
For complete description of the
wireless configuration and device
enrollments, refer to
Programming Guide for the
FORCE and VISION Alarm
Systems
Enrollment of the detector in the
system can be performed
manually or automatically via the
keypad.
1
Step 1b: Coverage Patterns
PIR Coverage Pattern
Figure 2
Step 5: Mount the detector on the bracket
Figure 7
Auto Enrolling (using RF
Communication):
1. Enter Installer menu, and select:
System Configuration >
Peripherals > Wireless
Peripherals > Enroll and delete
> Detectors >Enroll >Auto
Enrollment
2. Insert the batteries and close the
bracket
3. . In 3 seconds the detector will
send an Enrollment message.
The serial number should
appear on the keypad.
4. Select Enroll and press .
Figure 3
Figure 8