Specifications - Makita BDF446 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Switch trigger
4-1. Lamp
5-1. Reversing switch lever
6-1. Speed change lever
7-1. Adjusting ring

SPECIFICATIONS

Capacities
-1
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
7-2. Graduation
7-3. Arrow
8-1. Sleeve
9-1. Groove
9-2. Hook
9-3. Screw
10-1. Bit holder
10-2. Bit
12-1. Limit mark
Model
Steel
Wood
Wood screw
Machine screw
High (2)
)
Low (1)
Overall length
Net weight
Rated voltage
noise level determined
) : 71 dB (A)
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
2
BDF446
13 mm
38 mm
6 mm x 75 mm
0 - 1,500
0 - 400
192 mm
1.7 kg
D.C. 14.4 V
ENE034-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
ENG905-1
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
ENG900-1
operator that are based on an estimation of
exposure in the actual conditions of use (taking
sum)
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
4
13-1. Rear cover
13-2. Screw
14-1. Recessed part
14-2. Spring
14-3. Arm
15-1. Carbon brush cap
16-1. Hole
16-2. Carbon brush cap
M6
(with battery BL1815/BL1815N)
(with battery BL1830)
BDF456
13 mm
38 mm
10 mm x 89 mm
M6
0 - 1,500
0 - 400
192 mm
1.5 kg
1.7 kg
D.C. 18 V
ENG901-1