H3C S5500-HI Series Fundamentals Configuration Manual page 124

Hide thumbs Also See for S5500-HI Series:

Table of Contents

Configuration procedure

Configure the TFTP server (the configuration varies with server vendors):

# Obtain the system software image and configuration file, and save these files under the TFTP

server's working path. (Details not shown.)

Configure the members of the IRF fabric:

# Download new-config.cfg from the TFTP server to the master.

<IRF> tftp 2.2.2.2 get new-config.cfg

File will be transferred in binary mode

Downloading file from remote TFTP server, please wait.....

TFTP:

File downloaded successfully.

# Download new-config.cfg to the subordinate switch with the member ID of 2.

<IRF> tftp 2.2.2.2 get new-config.cfg slot2#flash:/new-config.cfg

# Download soft-version2.bin from the TFTP server to the master and the subordinate switch.

<IRF> tftp 2.2.2.2 get soft-version2.bin

...

File will be transferred in binary mode

Downloading file from remote TFTP server, please wait............

TFTP: 10058752 bytes received in 141 second(s)

File downloaded successfully.

<IRF> tftp 2.2.2.2 get soft-version2.bin slot2#flash:/soft-version2.bin

# Specify new-config.cfg as the next-startup configuration file for all members of the IRF fabric.

<IRF> startup saved-configuration new-config.cfg main

Please wait ...

Setting the master board ...

... Done!

Setting the slave board ...

Slot 2:

Set next configuration file successfully

# Specify soft-version2.bin as the startup system software image for all IRF members.

<IRF> boot-loader file soft-version2.bin slot all main

This command will set the boot file of the specified board. Continue? [Y/N]:y

The specified file will be used as the main boot file at the next reboot on slot

# Reboot the IRF fabric to complete the upgrade.

<IRF> reboot

Use the display version command to verify that the upgrade has succeeded. (Details not shown.)

917 bytes received in 1 second(s)

112

Table of Contents