Configuring None Authentication For Modem Dial-In (Not Supported In Fips Mode); Configuring Password Authentication For Modem Dial-In (Not Supported In Fips Mode); Configuring Scheme Authentication For Modem Dial-In - H3C S5500-HI Series Fundamentals Configuration Manual

Configuring none authentication for modem dial-in (not
supported in FIPS mode)
Step
1. Enter system view.
2. Enter one or more AUX user
interface views.
3. Enable the none
authentication mode.
4. Configure common settings
for the AUX user interfaces.
The next time you attempt to dial in to the device, you do not need to provide any username or password.
Configuring password authentication for modem dial-in (not
supported in FIPS mode)
Step
1. Enter system view.
2. Enter one or more AUX user
interface views.
3. Enable password
authentication.
4. Set a password.
5. Configure common settings
for the AUX user interfaces.
The next time you attempt to dial in to the device, you must provide the configured login password.

Configuring scheme authentication for modem dial-in

Follow these guidelines when you configure scheme authentication for AUX login:
• To make the command authorization or command accounting function take effect, apply an
HWTACACS scheme to the intended ISP domain. This scheme must specify the IP address of the
authorization server and other authorization parameters.
If the local authentication scheme is used, use the authorization-attribute level level command in
•
local user view to set the user privilege level on the device.
• If a RADIUS or HWTACACS authentication scheme is used, set the user privilege level on the
RADIUS or HWTACACS server.
Command
system-view
user-interface aux first-number
[ last-number ]
authentication-mode none
See "Configuring common settings
for modem dial-in (optional)."
Command
system-view
user-interface aux first-number
[ last-number ]
authentication-mode password
set authentication password
[ hash ] { cipher | simple }
password
For more information, see
"Configuring common settings for
modem dial-in (optional)."
46
Remarks
N/A
N/A
By default, modem users can dial
in to the device without
authentication.
Optional.
Remarks
N/A
N/A
By default, no authentication is
performed for modem dial-in users.
By default, no password is set.
Optional.