Fitting And Removing The Safety Net - Volvo V90 Owner's Manual

Twin engine
Hide thumbs Also See for V90:
Table of Contents

Advertisement

Fitting and removing the safety
net*
The safety net prevents loads from being
thrown forward in the passenger compart-
ment in the event of sudden braking.
The safety net is fitted into four mounting
points.
For reasons of safety, the safety net must
always be fastened and anchored as descri-
bed below.
The net is made of a strong nylon fabric and
can be secured two different locations in the
car:
Rear fitting - behind the rear seat.
Front fitting - behind the front seats.
WARNING
Loads in the luggage compartment must
be anchored well, and also using a cor-
rectly fitted safety net.
Fitting the safety net
Rear fitting
1.
If necessary, fold the rear seat backrests
forward in order to facilitate installation.
2. Lower the safety net cassette's end pieces
over the mounting eyelets in the recess of
the side panels. Press down the end piece
one side at a time. Check that the cassette
is properly secured.
3. Pull up the net.
LOADING, STORAGE AND PASSENGER COMPARTMENT
4. Hook one of the safety net's retaining
hooks into the rear roof mounting and
then press it forward to the end position.
5. Hook the other of the safety net's retain-
ing hooks on the opposite side and press
it forward to the end position.
}}
599
* Option/accessory.

Advertisement

Table of Contents
loading

Table of Contents