Volvo Service Programme; Data Transfer Between Car And Workshop Via Wi-Fi - Volvo V90 Owner's Manual

MAINTENANCE AND SERVICE

Volvo service programme

To keep the car as safe and reliable as possi-
ble, follow the Volvo service programme as
specified in the Service and Warranty Book-
let.
Volvo recommends engaging an authorised
Volvo workshop to perform the service and
maintenance work. Volvo workshops have the
personnel, special tools and service literature
that can provide the highest quality of service.
IMPORTANT
For the Volvo warranty to apply, check and
follow the instructions in the Service and
Warranty Booklet.
Service and repair
Service the car regularly. Follow Volvo's rec-
ommended service intervals.
If inspection and repair are required then only
an authorised Volvo workshop may carry out
the work.
WARNING
Do not carry out any repairs of your own on
this vehicle. Electrical cables and/or com-
ponents that have detached must only be
rectified by an authorised workshop - an
authorised Volvo workshop is recom-
mended.
604
Charging cable with control unit
IMPORTANT
Do not modify the control unit in any way.
Related information
Car status (p. 606)
•
Book service and repair (p. 607)
•
Connection of equipment to the car's
•
diagnostic socket (p. 40)
Servicing the climate control system
•
(p. 611)
Brake system maintenance (p. 444)
•
Engine compartment overview (p. 613)
•
Data transfer between car and
workshop via Wi-Fi
Volvo's workshops have a specific Wi-Fi net-
work for data transfer between your car and
the workshop. Your workshop visit will be
simpler and more efficient when the transfer
of diagnostic information and software can
take place via the workshop's network.
During a workshop visit, your service techni-
cian may want to connect your car to the
workshop's network via Wi-Fi to perform
fault-tracing and software download. For this
type of communication, the car only connects
to a workshop's network. It is not possible to
connect the car to another Wi-Fi network,
such as at home, in the same way as to a
workshop's network.
Connection with the remote control
key
Connection is normally handled by the service
technician who then uses the remote control
key buttons. That's why it's important to take
a key with buttons with you for the workshop
visit. Press three times on the lock button on
the remote control key to connect the car to
the workshop's network via Wi-Fi.
When the car is connected to a Wi-Fi net-
work, the symbol appears in the centre
display.