Operating Cargo Cover - Volvo V90 Owner's Manual

LOADING, STORAGE AND PASSENGER COMPARTMENT

Operating cargo cover*

There are two extended positions for the
cargo cover - a full-cover position and a load-
ing position, where it is partially extended to
make it easier to reach further into the cargo
area.
Full-cover position
1. Grip the handle and pull out the cargo
cover so that it slides over the side panels
in the cargo area. Pull to the end position.
2. Guide the cover's attachment pins into the
grooves in the side panels. Release, while
at the same time angling the handle
slightly upwards so that the attachment
pins hook in.
> The cargo cover is locked in the full-
cover position.
IMPORTANT
Do not load objects on top of the cargo
cover.
596
Loading mode
From the full-cover position:
Grasp the handle and pull it back until it
stops.
Angle the cover down.
Move the cover and its attachment pins
carefully forward and up over the hooks.
> The cover retracts until it stops in the
loading position.
Returning to full-cover position from loading
position:
1. Grip the handle and pull the cargo cover
out to the end position.
2. Release the handle so that the attachment
pins hook into the hooks.
> The cover is locked in the full-cover
position.
With an automatic* cargo cover, the cover will
be retracted from full-cover position to loading
position every time the tailgate is opened, and
extended again when the tailgate is closed.
The cargo cover detects if something is
obstructing its movement and then retracts
automatically.
WARNING
Pay attention to the risk of crushing when
opening and closing with the automatic*
cargo cover.
IMPORTANT
If the cargo area is loaded with a bulky load
then the automatic* cargo cover is moved
to retracted position in order to avoid it
making contact with the load.
NOTE
The cargo cover may not operate automati-
cally in low passenger compartment tem-
peratures.
* Option/accessory.