Cargo Area Cover; Steel Cargo Grid - Volvo V60 Cross Country Owner's Manual

Cargo area cover

The cargo area cover can be used to conceal
objects in the cargo area.
Use
•
Pull the cover over the cargo and hook it
into the holes in the rear cargo area pil-
lars.
•
To retract (roll up) the cover, release it
from the holes and guide it toward the
rear seat backrest.
Installing the cover
1. Press the end piece on one side of the
cargo area cover into the retaining
bracket in the side panel of the cargo
area .
2. Do the same on the opposite side
3. Press both sides of the cover until they
click into place
longer be visible.
4. Check that both ends of the cover are
securely locked in place.
Removing the cover
1. Press one of the end pieces of the cover
inward.
2. Pull the cover carefully upward and out-
ward. The other end will release automati-
cally from its retaining bracket.
Folding down the cargo area cover's
rear flap
The cargo area cover's rear flap points hori-
zontally when the cover is retracted (rolled
up). To fold it down:
– Pull the flap slightly rearward past its sup-
ports and fold it down.
NOTE
On models equipped with this cover, it
should be removed before a child seat is
attached to the child restraint anchors.
Related information
•
Loading – general (p. 139)
.
05 Loading and storage

Steel cargo grid

. The red mark will no
Your vehicle can be equipped with a steel grid
that helps prevent objects in the cargo area
from moving forward into the passenger com-
partment.
Folding the grid up/down
Grasp the lowering edge of the grid and pull it
rearward/upward, or push it downward/
forward.
If the steel grid is to be used with the
optional cargo area cover, the grid must
be folded down before the cargo area
cover is put in place.
NOTE
05
}}
143