Access Panel - HP MP9 G4 Maintenance And Service Manual

Access panel

To access internal components, you must remove the access panel:
1. Prepare the computer for disassembly
2. Loosen the thumbscrew on the rear of the computer (1), and then slide the panel forward and lift it off
the computer (2).
NOTE:
NOTE:
models have vent holes on the access panel.
If necessary, a Torx T15 or flat-bladed screwdriver can be used to loosen the thumbscrew.
Your computer model may look slightly different from the illustration in this section. Some
(Preparation for disassembly on page 14).
Access panel 15