Redback A 1709 Operating Manual page 8

50 event weekly timer

Hide thumbs

Table of Contents

Redback® A 1709 50 Event Weekly Timer

3.1.3 Edit the Clock Time

This option sets the current time.

After selecting the "Edit Time on Clock" option from the menu shown in Fig 3.3 the LCD will display the screen shown in

Fig 3.13 where the cursor flashes on the current day.

Pressing the up and down buttons will scroll through the

days Monday to Sunday. Pressing "Enter" will confirm the

day and then move the cursor to the hour option as shown

in Fig 3.14.

Change the hour by pressing the up and down buttons

and press "Enter" when finished. The cursor will now move

to the minute section of the clock time. Repeat the above

procedure to change the minutes and press "Enter" when

finished. The cursor will now move to the seconds section

of the clock time. Repeat the above procedure again to

change the seconds and press "Enter" when finished. The

menu button can be pressed at any time to exit the setup.

The clock time is now set.

After completing the clock time, the screen will change to

the current time.

Redback® Proudly Made In Australia

Clock Day

Enter

Edit time

on clock

Press the UP and DOWN

buttons to change the

day.

Enter

Press the ENTER

button to make your

selection

Press the MENU

button to exit at any

time.

Fig 3.13

Clock Time

Press the UP and DOWN

buttons to change the

hour/min/secs.

Enter

Press the ENTER

button to make your

selection

Press the MENU

button to exit at any

time.

Fig 3.14

Sunday