Table of Contents
Advertisement
Redback® A 1709 50 Event Weekly Timer
The cursor is now positioned over the hour section of the
start time as shown in Fig 3.9.
Change the hour by pressing the up and down buttons
and press "Enter" when finished. The cursor will now move
to the minute section of the start time. Repeat the above
procedure to change the minutes and press "Enter" when
finished. The cursor will now move to the seconds section
of the start time. Repeat the above procedure again to
change the seconds and press "Enter" when finished. The
start time is now set for this Station (or Event).
After completing the start time, the screen will change to the Zone and Duration options screen as shown in Fig 3.10.
From this point the user can scroll through all 50 stations using the up and down buttons as shown in fig 3.11. This makes
it very easy to view all Output Zone settings at a glance. Once the station number desired is shown on the LCD press the
"Enter" button to confirm and move to the next step which is to make changes to the zone output.
6
Redback® Proudly Made In Australia
Fig 3.9
1) ZONE
DURATION
OFF
00:00:00
Fig 3.10
Station (or Event) number
1) ZONE
DURATION
Enter
OFF
00:00:00
Press the UP and DOWN
buttons to scroll up and
down.
Enter
Press the ENTER
button to make your
selection
Menu
Press the MENU
button to exit at any
time.
Fig 3.11
Start time
1)
Monday
Start @ 00:00:00
Press the UP and DOWN
buttons to change the
hour/min/secs.
Enter
Press the ENTER
button to make your
selection
Menu
Press the MENU
button to exit at any
time.
50) ZONE DURATION
OFF
00:00:00
1) ZONE
DURATION
OFF
00:00:00
2) ZONE
DURATION
OFF
00:00:00
3) ZONE
DURATION
OFF
00:00:00
49) ZONE DURATION
OFF
00:00:00
1)
Monday
Start @ 23:00:00
1)
Monday
Start @ 00:00:00
1)
Monday
Start @ 01:00:00
1)
Monday
Start @ 02:00:00
1)
Monday
Start @ 22:00:00
www.redbackaudio.com.au
Advertisement
Table of Contents
