Omega Altise OAPC14W Operation, Maintenance And Safety Instructions page 16

OPERATING INSTRUCTIONS
VENTILATION MODE
Press MODE button repeatedly until the LED of FAN operation lights up.
•
In ventilation mode the room air is circulated, but not cooled.
•
Press SPEED button repeatedly to select the fan speed as desired.
•
DRY MODE
Press MODE button on the control panel or remote control, the LED of DRY operation lights up.
•
The fan speed is unable to select. User should connect the hose to the drain outlet at the bottom of the
•
unit.
Note: In this mode, the fan speed switches over to low speed and the temperature cannot be selected.
SLEEP MODE
The sleep mode can be activated when in cool mode.
In cool mode :
After 1 hour the pre-set temperature is increased by 1 ℃, after another hour the pre-set temperature will again
be increased by 1 ℃.
TIMER SETTING
The timer has two ways of operation:
16
OMEGA ALTISE