Charging; Connecting To Power Supply - Stihl 45220115748 Instruction Manual

English
► Operate the trimmer alone.
► Keep the cutting attachment close to the ground.
► Watch out for obstacles.
► Stand on the ground while working and keep a good
balance.
► If you begin to feel tired: Take a break.
￭ The rotating cutting attachment can cut the user. This can
result in serious injuries.
► Do not touch the rotating cutting attachment.
► If the cutting attachment is blocked by an object: Switch
off the trimmer and remove the battery. Then remove
the object causing the blockage.
￭ If the behavior of the trimmer changes during operation or
feels unusual, it may no longer be in a safe condition. This
can result in serious injuries and damage to property.
► Stop work, remove the battery and contact your STIHL
servicing dealer for assistance.
￭ Trimmer vibrations may occur during operation.
► Wear gloves.
► Take regular breaks.
► If signs of circulation problems occur: Seek medical
advice.
￭ If the cutting attachment makes contact with a foreign
object during operation, the object or parts of it may be
thrown at high speed. This may result in personal injuries
and damage to property.
► Clear away all foreign objects from the work area.
￭ Note that the cutting attachment continues to rotate for a
short period after you release the trigger. This can result
in serious injuries.
► Wait until the cutting attachment comes to a complete
stop.
40
4.8

Charging

WARNING
￭ A damaged or defective charger may produce an unusual
smell or emit smoke during the charging process. This
may result in personal injuries and damage to property.
► Disconnect the plug from the wall outlet.
￭ The charger can overheat and cause a fire if heat
dissipation is inadequate. This can result in serious or
fatal injuries and damage to property.
► Do not cover the charger.
4.9

Connecting to Power Supply

Contact with live components may occur for the following
reasons:
– The connecting cable or extension cable is damaged.
– Connecting cable plug or extension cable is damaged.
– Wall outlet is not properly installed.
DANGER
￭ Contact with live components can result in an electric
shock. This can result in serious or fatal injuries.
► Check that the connecting cable, extension cable and
their plugs are not damaged.
If the connecting cable or extension cable is
damaged:
► Do not touch damaged areas.
► Disconnect the plug from the wall outlet.
► Never touch the connecting cable, extension cable or
their plugs with wet hands.
► Insert the plug of the connecting cable or extension
cable in a properly installed fused wall outlet with
ground contact.
► Install the charger with a ground fault circuit interrupter
(30 mA, 30 ms).
4 Safety Precautions
0458-806-9821-A