Setting Up The Monitor; Installation - Philips EVNIA 27M1N3200Z User Manual

2. Setting up the
monitor

2.1 Installation

1
Package contents
27M1N3200VS 27M1N3200Z
27M1N3200VL 27M1N3200ZA
27M1N3200ZS 27M1N3200V
27M1N3200VA
Power
*Different according to region
Quick start
Register your product and get support at www.philips.com/welcome
*Earphone-Hang
*HDMI *DP
2
Install the base
1. Place the monitor face down on soft
and smooth surface taking care to
avoid scratching or damaging the
screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
27M1N3200Z
27M1N3200ZA
27M1N3200ZS
27M1N3200V
27M1N3200VA
27M1N3200VS
27M1N3200VL
(2) Use your fingers to tighten the
(3) Gently attach the stand to the
27M1N3200Z/27M1N3200ZA/27M1N3200V/27M1N3200VA
27M1N3200ZS/27M1N3200VS/27M1N3200VL
Caution
Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
5
stand.
screw located at the bottom of the
base.
VESA mount area until the latch
locks the stand.