Weber CFR 90 Operating And Maintenance Manual page 18

Changing the oil in the exciter
Remove the oil drain plug / filler plug (1) and drain oil.
Fill with oil as specified in the fill quantity table.
Screw in oil drain plug or filler plug.
Ensure that the contact surfaces on the oil drain plug /
filler plug and vibrator housing are clean.
Select collection vessels large enough to prevent oil from
spilling onto the ground. Dispose of waste oil in an envi-
ronmentally friendly manner (regulation on waste oils).
Wipe up / off oil slick and oil residue and dispose of
fuel-soaked cleaning cloths in an environmentally re-
sponsible manner.
Checking the V-belt
Remove the V-belt guard (2).
Check the V-belt (3) for cracks, damaged flanks, and wear.
If there is excessive wear, replace the V-belt.
18
Oil drain plug – exciter
1
2
3
CFR 90