Connecting The Battery; Removing Or Installing The Battery - Toro 31902 Operator's Manual

Connecting the Battery

WARNING
Incorrect battery cable routing could damage
the machine and cables, causing sparks.
Sparks can cause the battery gasses to
explode, resulting in personal injury.
Always connect the positive (red) battery
cable before connecting the negative (black)
cable.
1. Connect the positive cable to the battery and
tighten the battery-clamp nut
Figure 59
1. Positive battery cable
2. Connect the negative cable to the battery and
tighten the battery-clamp nut
Important:
Ensure that the cable-clamp
fasteners do not interfere with the fuel tank.
(Figure 59).
g289502
2. Negative battery cable
(Figure 59).
Removing or Installing the
Battery
A retainer (Figure 60) holds the battery in the tray.
Loosen the retainer hardware to remove the battery;
tighten it when installing the battery.
Note:
To access the battery, refer to
Battery (page 54). Replace the cover when you install
the battery.
1. Retainer hardware
55
Accessing the
Figure 60
2. Retainer
g285614