Toro 31902 Operator's Manual page 10

Decal 144-3952: Affix over Decal 139-6215 (as
shown in the CE Kit Installation Instructions) for use
in CE-compliant countries (Models 31900 and 31901
only).
Note:
This machine complies with the industry standard
stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator's
Manual as well as the conditions in which you would operate the
machine to determine whether you can operate the machine in the
conditions on that day and at that site. Changes in the terrain can
result in a change in slope operation for the machine.
1. Read the Operator's
Manual.
2. Tipping hazard—do not
mow across slopes greater
than 13 degrees; do not
mow up and down slopes
greater than 13 degrees.
3. Tipping hazard—do not
mow across slopes greater
than 14 degrees; do not
mow up and down slopes
greater than 14 degrees.
4. Tipping hazard—do not
mow across slopes greater
than 15 degrees; do not
mow up and down slopes
greater than 15 degrees.
144-3952
5. Tipping hazard—do not
mow across slopes greater
than 16 degrees; do not
mow up and down slopes
greater than 16 degrees.
6. Tipping hazard—do not
mow across slopes greater
than 17 degrees; do not
mow up and down slopes
greater than 17 degrees.
7. Tipping hazard—do not
mow across slopes greater
than 18 degrees; do not
mow up and down slopes
greater than 18 degrees.
8. Tipping hazard—do not
mow across slopes greater
than 19 degrees; do not
mow up and down slopes
greater than 19 degrees.
decal144-3952
10