Table of Contents
Advertisement
3.
Slide the steering wheel and washer onto the
steering shaft
(Figure
4.
Use the nylock nut to secure the steering wheel
to the shaft. Tighten the nylock nut to 27 to 35
N∙m (20 to 26 ft-lb).
5.
Mount the cover to the steering wheel
13).
9
Installing the Bumper
Model 31902 Only
Parts needed for this procedure:
1
Bumper
2
Bolt (3/8 x 2-3/4 inches)
4
Bolt (3/8 x 3-1/4 inches)
6
Nut (3/8 inch)
Procedure
1.
Remove the bumper from the shipping skid.
2.
Use 4 bolts (3/8 x 3-1/4 inches) and 4 nuts (3/8
inch) to secure the upper area of the bumper to
the machine frame
13).
(Figure
(Figure
14).
1. Bolt (3/8 x 3-1/4 inches)
2. Bumper
3.
Use 2 bolts (3/8 x 2-3/4 inches) and 2 nuts (3/8
inch) to secure the bumper under the machine
frame
(Figure
10
Connecting the Battery
Model 31902 Only
No Parts Required
Procedure
Connect the battery; refer to
(page
55).
17
Figure 14
3. Bolt (3/8 x 2-3/4 inches)
14).
Connecting the Battery
g302775
Advertisement
Table of Contents
