Checking The Power Consumption; Resetting The Filter Clean Reminder - Samsung AR7000 Manual

Checking the power consumption

This function will display the amount of electricity consumed by operating the air conditioner.
When the air conditioner is operating;
Indoor unit display

Resetting the Filter clean reminder

When Filter clean reminder ( ) lights up on the indoor unit display, clean the filter and reset the reminder by following this
instruction.
Indoor unit display
AR7000 CV HP_IB&IM_DB68-05637A-00_EN.indd 25
1. Press the Settings button.
2. Press the , or Settings button until (Usage) indicator starts to blink.
3. Press the SET button to check the power consumption.
- 3 seconds after setting power consumption checking function, (Usage) indicator
on the remote controller will disappear.
- Indoor unit will display the amount of Power consumption for few seconds and
then return to usual status by displaying the set indoor temperature.
- Power consumption will be calculated from the moment the air conditioner is
turned on and calculated value will be reset when the air conditioner turns off.
- 0.1 is the default value of the electricity consumption and 99 is the maximum
value. Unit is in kWh.
When the air conditioner is not operating, power consumption will not
be displayed on the indoor unit display.
1. Press the Settings button.
2. Press the , or Settings button until (Filter Reset) indicator starts to blink.
3. Press the SET button to reset Filter clean reminder.
- 3 seconds after setting Filter clean reminder function, (Filter Reset) indicator
on the remote controller display will disappear and ( ) indicator on the indoor
unit display will disappear.
English-25
2015/10/12 15:43:07