Table of Contents
Advertisement
A channel is a group of radio characteristics, such as
transmit/ receive frequency pairs. The following
methods are options on how to select a radio
channel. The result of all the methods is the same.
You can use the options interchangeably depending
on your preference and the programmed functions.
•
Select a channel via the preprogrammed 16–
Position Select Knob to the desired channel.
a) Rotate the preprogrammed 16–Position
Select Knob to the desired channel.
b) Press the PTT button to transmit on the
displayed zone channel.
•
Select a channel via the radio menu Chan:
a)
or to Chan.
b) Press the Menu Select button directly below
Chan.
c)
or
to the required channel.
d) Press the Menu Select button directly below
Sel to confirm the selected channel.
e) Press the PTT button to transmit on the
displayed zone channel.
•
Select a channel via the radio menu Channel Up
or Channel Down:
a)
or
to ChUp or ChDn.
b) Press the Menu Select button directly below
ChUp or ChDn.
Positions of ChUp and ChDn on the display may
differ each time you release the Menu Select
button. Read carefully before you press.
c) Press the PTT button to transmit on the
displayed zone and channel.
Mode Select Feature
Mode Select allows a long press to save the current
zone and channel of your radio to a programmable
button, or a softkey; then once programmed, the
short-press of that button or softkey changes the
transmission to the saved zone and channel.
There are two methods to save the selected zone and
channel:
•
Softkeys
•
Programmable buttons
Note
Your radio must be preprogrammed to allow
you to use this feature.
51
English
Advertisement
Table of Contents
