Setting The Timer Functions 701 & 702 Series - Rheem Eco 703 Series Owner's Manual And Installation Instructions

SETTING THE TIMER 701 & 702 SERIES
TIMER FUNCTIONS
701 & 702 Series have 24 hour timers fitted. For 703 series go to page 15.
Function
Clock
STD/AUTO
Set ON/OFF
Times
Sleep Delay Time
Filter Life*
Service Menu
* Lazer Boiling Water Units do not have a water filter fitted. However filter life
functions for 701 and 702 Series can be utilised if the water supply to the Boiling
Water Unit has an external water filter fitted. You can install an optional Rheem
remote filter kit (PN 317327), which is recommended for areas with poor water
quality.
To select a Timer Mode
Press the (P) button until the desired mode is displayed on the screen. Press the (✓)
button to confirm selection. Pressing (X) button at any time returns the unit to the
main menu. Any functions previously accepted will be retained.
Note: The display will revert back to main menu from any mode if a button has not
been pressed for 1 minute.
Mode
N/A
STD
AUTO
N/A
N/A
Remaining Life
Filter Reset
Set Filter Life
Error Codes
Boiling Temp
Calib. Reset
Temp Override
Software Version
Temp Show
ON/OFF
TB Treq
Description
Set clock time.
Boiling Water Unit 'ON' 24 hours 7 days.
Boiling Water Unit operates according to
programmed 'Set ON/OFF Times'.
Program ON/OFF times for AUTO mode.
Program delay-off time from last usage
(operates in AUTO mode only).
Displays remaining filter life in litres.
Resets filter 'Remaining Life' to 'Set Filter Life'
setting. Utilised when replacing filter.
Program filter life start value in litres.
Displays alpha error codes (refer to page
error codes and their meanings).
Displays the current boiling water temperature in
ºC.
Reactivates automatic boiling point calibration
operation.
Manually select calibrated temp setting.
Selectable from 70 – 99°C.
Displays Timer and Controller software versions
(top = Timer, lower = Controller).
Enable/disable boiling water temperature display
on timer screen (in °C).
Displays boiling water temperatures in °C. (TB =
calibrated temp, Treq = maintained temp).
7
11
for