TP-Link NC220 User Manual page 28

On this section, you can configure your camera's IP address which is used to access and
configure the camera.
Dynamic IP: Select this option when a DHCP server is installed on the network to issue IP

address assignment. With this setting, the IP address of the camera is assigned automatically.
Fallback IP: If the camera cannot get a Dynamic IP address from a DHCP server within

limited tries, the camera will assign a default IP address, 192.168.0.10, by itself as the
Fallback IP address.
Static IP: Select this option when a static or fixed IP address is obtained for the camera. A

static IP address will ease your access to the camera in the future. Add your camera's static
IP information to your router to avoid IP conflicts.
MAC Address: Displays the Ethernet MAC address of the camera. The MAC address is

read-only.
IP Address: Enter a fixed IP address for the camera in dotted-decimal notation.

Subnet Mask: Enter the subnet mask in dotted-decimal notation. The default value is

"255.255.255.0."
Default Gateway: Enter the default gateway in dotted-decimal notation.

NC220 Day/Night Cloud Camera, 300Mbps Wi-Fi
NC230 HD Day/Night Wi-Fi Cloud Camera
NC250 HD Day/Night Cloud Camera, 300Mbps Wi-Fi
21